There is a wide usage of concrete floors on both residential and commercial setups. Concrete floors exhibit strength and versatility. The unfinished and rough look of concrete floors done not well are not favoured by most people. There are however ways of adding the strength and versatility of the concrete floors. Most people go for polished floors for kitchens, bathroom, and living rooms. The epoxy coating, on the other hand, is preferred for the garage, basement and laundry room. There features can only be achieved if the proper concrete floor preparation is done. The contractor might take longer to complete the preparation of the concrete floor. It is however desirable since failure to do this might result in a bad looking coating or one that will age prematurely.
A lot has to be done if it involves preparing existing concrete floor. Closely give a look at the sealant or coating. you have to remove these. Remove any excessive laitance until you expose the solid concrete. The next step is to conduct a thorough cleaning on the floor. Special equipment and special chemicals have to be sued to do this. From here, the next step largely depends on the type of floor finish that is desired. For new floor, you just pour the concrete on the surface. You will use trowels to smooth and floats to bring excessive water to the surface. This is a simple task that can be handled virtually by any person upon doing some practice.
The durability and highly resistant to grease and oils make the epoxy coating to be the preference for garages and auto showrooms. Epoxy coating perfectly adheres to rough surfaces. If you want to have epoxy coating, ensure that you have it rough. This can be done mechanically or by use of chemicals. Any of the methods is effective, but your contractor will prefer one of them and give reasons.
Another option is to prepare concrete floor for living areas. Preparing the concrete floor for the home interior will have to be done differently from the above process. The floor requires to be polished. To bring the best, a lot of polishing and grinding is required. The majority of homeowners want to have stained concrete floors
Finding Similarities Between Businesses and Life
The best floor stains are acid based. The stain is formed by reacting with the concrete. Since the stain is chemically reactive, it has to be neutralized using special soaps. Plain water will be used to finalize the cleaning. Unlike the epoxy coating that is strong enough, the polished floor require coating for protection. To achieve this, apply a base sealant and then wax above it. It can be polished several types before the wax passes it usefulness. Working with a concrete floor expert through the process is desirable.A Quick History of Concrete